Guangzhou Opal Machinery Parts Operation Department
Guangzhou Opal Machinery Parts Operation Department.
Add to Cart
575-41-17420 6219-71-1150 FOR KOMATSU O-Ring :
1). Color: NBR Black, brown/green
2). Hardness: 70-90 Shore A
3). size:standard size
4). Certifie: ISO9001
| Part No | Parts name | Part No | Parts name |
| 01252-60616 | Bolt, Hexagon Socket Head Komatsu | 01011-61035 | Bolt Komatsu |
| 01252-60630 | Bolt, Hexagon Socket Head Komatsu | 01011-81225 | Bolt Komatsu |
| 01641-20608 | Washer Komatsu | 01643-31032 | Washer Komatsu |
| 07002-12434 | O-ring | 01643-31232 | Washer Komatsu |
| 575-41-17420 | O-ring Komatsu | 07000-11007 | O-ring Komatsu |
| 709-26-11450 | Spring | 07000-11009 | O-ring Komatsu |
| 723-23-10700 | Valve, Control | 07000-12016 | O-ring Komatsu |
| 723-23-10701 | Valve, Control | 07001-01007 | Ring, Back-up Komatsu |
| 723-26-14560 | Spring | 07001-01009 | Ring, Back-up Komatsu |
| 723-26-14570 | Spring | 07001-02016 | Ring, Back-up Komatsu |
| 723-26-14580 | Spring | 07002-02434 | O-ring |
| 723-26-15110 | Case Komatsu | 07002-10823 | O-ring Komatsu |
| 723-26-15121 | Retainer | 07002-11023 | O-ring |
| 723-26-16760 | Case | 07002-11423 | O-ring |
| 723-26-16770 | Retainer | 702-21-55620 | Plug Komatsu |
| 723-26-16780 | Retainer | 708-8E-16160 | Plug Komatsu |
| 723-26-16790 | Plug | 723-23-10700 | Valve, Control |
| 723-23-10800 | Valve, Control | 723-26-15190 | Plug |
| 723-23-10701 | Valve, Control | 723-26-21750 | Cover |
| 723-60-21102 | Valve, Relief Komatsu | 723-56-12210 | Cover |
O RING PART NO.OF KOMATSU
| PART NO. | PART NO. | PART NO. | PART NO. |
| 575-41-17420 | 702-21-54540 | 706-7K-40020 | 708-1W-28910 |
| 6219-71-1150 | 702-21-55420 | 706-7k-40040 | 708-1W-28920 |
| 6219-71-1160 | 702-21-55440 | 706-8J-41620 | 708-21-12970 |
| 700-13-31161 | 702-21-55450 | 707-34-55020 | 708-25-12340 |
| 700-22-11410 | 702-21-55520 | 707-34-60030 | 708-25-52860 |
| 700-22-11450 | 702-75-11520 | 707-35-52830 | 708-25-52861 |
| 700-80-61260 | 703-04-98110 | 707-35-52900 | 708-25-62361 |
| 700-84-11240 | 703-06-98310 | 707-35-52920 | 708-27-22131 |
1. The O-ring is an annular seal having an O-shaped cross section, the size of which is determined by the inner diameter ID and the wire diameter CS.
2. O-ring size calculation: outer diameter = inner diameter + 2 x wire diameter (OD = ID + 2x CS).
3. The purpose of using O-ring seals is to prevent leakage and loss of liquids or gases.
4. O-rings are the most commonly used type of seal because of their simplicity, convenience, and small installation space. As long as the groove design and material selection are correct, and the operating conditions are within the temperature range of the rubber material, the seal can have a long-term sealing effect in the static or dynamic seal.
Picture Preview:
FAQ
Q1: What’s delivery time?
A: Within 5-15 days after getting your desposit.
Q2: To which places have you exported?
A: North America, Europe, Middle East, Africa, Southeast Asia and so on.
Q3: What’s your payment terms?
A: We usually accept all kinds of payment terms .Such as T/T,L/C, etc.
Q4: Can I mix different power in one container?
A: Yes ,Different models can be mixed up in one container,even one order.
Q5: Are you trading company or manufacturer?
A:We are trading company and we also have our own factory to produce seals.With more than 20 years of PU manufacturing experience.
Q6: Do you have a minimum order requirement?
A: Small trial order is acceptable.
Q7:What is your main products ?
A:We are specialized in the excavator spare parts, such as control valve ,hydraulic pump, center rotary , travel motor, swing motor, cylider, hydraulic break seal kit and other repair kits. If you need other excavator parts, we also can supply as your requirements.
Q8:What is your standard packing?
A: All the goods will be packed by carton box. Special packing method can be accepted when needed.